test bi page

The spigot is included with the Aurora & Eclipse cantilever models and can be bolted directly to suitable concrete slabs or decking. Upgrade to 316 marine grade stainless steel available. Able to be removed from (optional) base plate or in ground fitting for clear space when desired.

This non-permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

Designed for use with the Aurora Cantilever Umbrella Cross Base, these pavers are made from moulded concrete and come in a set of 4. Each concrete block weighs 22kg and measures 500mm x 500mm.

Our base plate is suited for areas with existing concrete slab or decking. The base plate can be upgraded to 316 marine grade stainless steel. Decking installations may require extra support to the joists. Suitable concrete substrate is 100mm thickness.
Click here to watch an instructional video on how to install a Cantilever Umbrella base plate to a concrete slab.

Black powder-coated plate designed for use with sandbags, pegs or can be bolted into concrete or decking. The pipe has double-locking screws to secure the umbrella. To suit any umbrella post up to 40mm in diameter: Weight = 14kg, 500mm x 500mm base.

The inground sleeve is suitable for installing to all soft surfaces such as lawn, garden beds, sand/aggregate beneath pavers. The hole to receive concrete and unground sleeve is usually 500mm square and 700mm deep with a belling out of the bottom. Once the concrete has set and cured the umbrella spigot simply bolts on with 4 stainless 316 marine grade steel screws.

The Barrel extension is used to raise a cantilever umbrella out of dirt, sand or tan bark so it doesn’t cause any damage to the rotating mechanism or just to give some extra height to the umbrella if needed. It is 300mm high and 215mm in diameter, and is black powder coated steel.
The Barrel extension is designed to be bolted to an in-ground sleeve or base plate.

The sleek aluminium cover hides 12 concrete pavers (measuring 400mm x 400mm). This non permanent option is perfect for areas where you would like to move the umbrella to different locations around the garden or if you live in a rental property.

The wheel set is optional, so you can use this impressive base without them. This type of base is suitable for light to moderate winds only, (depending on umbrella size).

Optional lockable 316 marine grade stainless steel wheels available.

Concrete has been injected into moulded plastic to create this sleek light grey umbrella base. The base weighs in at 30kg and is 56cm in diameter. To suit any umbrella, post up to 40mm in diameter.